Water Heater Age and Condition: What We Check During a Northern Nevada Home Inspection

The water heater is easy to ignore until it fails, and it usually fails at a bad time. It's also one of the items that comes up most in buyer negotiations, because replacement is a real expense and an old unit can leak. Here's what we look at during an inspection and what you can check yourself.
How old is it?
The data plate on the side of the tank tells you the model, capacity and fuel type, and it's where the age comes from. Some plates print the build date outright, as the one below does. On others the date is encoded in the serial number. Tank-style water heaters commonly last somewhere around 8 to 12 years, though that varies with the model and the water. Northern Nevada water is often hard, and mineral buildup inside the tank can shorten that life. A unit that's near or past its expected life isn't necessarily failing, but it's worth budgeting for.

What we check
Signs of leaks, rust or corrosion on the tank and fittings
The temperature and pressure relief (TPR) valve and its discharge pipe
Venting and combustion air on gas units, and the gas connection
Water supply connections, shutoff valve and expansion tank, where one is present
Whether the unit is in a spot where a leak would do damage, and whether there's a drain pan or drain
That it actually heats water at the fixtures
Warning signs between inspections
Rumbling or popping noises, which can mean sediment in the tank
Rusty or discolored hot water
Moisture or rust at the base of the tank
Running out of hot water faster than you used to
If you see water pooling under the tank, shut off the water supply to it and call a plumber. For buyers, an older unit is a fair thing to raise with the seller, and a clear report with the data plate photo gives you something concrete to point to. Schedule an inspection or see our pricing.



Comments