top of page

What a Radon Test Report Looks Like (and How to Read the Numbers)

Writer: Bob and Kathy Parmenter
Bob and Kathy Parmenter
Nov 4
1 min read

Radon is invisible, so the report is the only way you see it. Here's a real report from a crawlspace home, with the property name and address removed, and how to read it.

Sample radon measurement report summary showing minimum, average and maximum radon level, temperature, humidity and pressure

The numbers that matter

  • Average radon level: 2.5 pCi/L. This is the number that gets compared to the EPA guidance.

  • Minimum and maximum: 0.8 and 5.4 pCi/L. Radon moves around hour to hour, so a single high reading doesn't decide anything. The average does.

  • Temperature, humidity and pressure: these are recorded to show that conditions were normal during the test.

  • Motion events: none detected, meaning the monitor wasn't moved during the test.

What a result of 2.5 means

The EPA Action Level is 4.0 pCi/L. This home averaged below that, but at least half of it, and in that range the EPA suggests homeowners consider a radon mitigation system. It also recommends retesting at least every 5 years, and testing during the heating season, when radon tends to run highest.

Every home is different, and a neighbor's result doesn't predict yours. If you're buying, a report like this gives you real data to discuss with the seller. If you're staying put, it tells you whether it's worth keeping an eye on or acting.

Bob is a certified NRPP Radon Measurement Professional. Learn more on our radon testing page or schedule an inspection.

 
 
 

Comments


bottom of page